-Not install Toolbars or other junk...
-To Silent Install use /silent or /verysilent switch...
I'll take a look when I can...escorpiom wrote:Nice work, I'm using your spanish Avira repack.
BTW, 18.104.22.168 is out.
Updated to v22.214.171.124...escorpiom wrote:Nice work, I'm using your spanish Avira repack.
BTW, 126.96.36.199 is out.
There isn't option in setup.inf file, sorry...escorpiom wrote:Sorry to be a pain 4lfre1re, is it possible to disable the short system scan (luke filewalker) that runs after install?
I remember it was an option during install that we could disable.
The scan takes a bit of time and my installs are mostly clean so no reason to have Avira scan the system.
Code: Select all
;********************************************************************** ; Example of a script file for AntiVir setup ; ; The setup program must be started with the parameter /INF="name", ; whereby "name" is the fully qualified name of the script file. ; ; Example: PRESETUP /INF="e:\disks\setup.inf" ; ;********************************************************************** [DATA] ; Target path for the installation. Please note that setup automatically ; attaches the company name (Avira) and the product path. ; Environment variables such as %PROGRAMFILES% can be used. ; e.g., if ; DestinationPath=%PROGRAMFILES% ; the result, for example, would be ; C:\Programs\Avira\AntiVir Workstation DestinationPath=%PROGRAMFILES% ; Create AntiVir program group ; 0 = Off, 1 = On ProgramGroup=1 ; Specifies whether a desktop icon is to be created for AntiVir ; 1 = Create, 0 = Do not create. DesktopIcon=1 ; Specifies whether a system restore point is to be created ; 1 = Create, 0 = Do not create UseSystemRestore=0 ; Path and file name of a license file to be installed at the same time. KeyFile=D:\INST\LICENSE\hbedv.key ; Path and file name of an optional predefined INI file in which ; the configuration of AntiVir can be predefined. AVWinIni=d:\inst\config\avwin.ini ; If necessary, Windows is restarted automatically. (recommended) ; 0 = Off, 1 = On RestartWindows=0 ; If you want, setup shows information before ; the automatic restart. ; 0 = Do not show information, 1 = Show information ShowRestartMessage=0 ; With this parameter, you can specify whether or not the mail scanner ; is to be installed. The mail scanner ; monitors incoming emails as well as their attachments. 1 = Mail scanner ; scanner, 0 = Do not install mail scanner. MailScanner=1 ; Install the virus guard AVGuard ; 0 = Do not install, 1 = Install Guard=1 ; With this parameter, you can specify whether or not the WebGuard, ; is to be installed. The WebGuard monitors ; the HTTP connections, e.g. while surfing the Internet ; 1 = Install WebGuard, 0 = Do not install WebGuard. WebGuard=1 ; The shell extension of AntiVir is registered in the registry. ; This extension can only be run under Windows NT 4.0 or higher. ; 0 = Do not register, 1 = Register ShellExtension=1 ; The following parameters can be used to ; influence the setup. ; Update = Accept settings and update files ; (Repair installation) ; Modify = Install new program features using SETUP.INF, ; Update files. (Change Installation) ; Remove – Uninstall AntiVir from the system SetupMode=Modify ; With this parameter, you can specify whether or not the AntiRootKit module ; is to be installed by AntiVir. If this module is not ; installed, the scanner cannot search for rootkits on the system. ; 1 = Install AntiRootkit, 0 = Do not install AntiRootkit. RootKit=1 ; With this parameter, you can specify whether or not AntiVir ProActiv ; is to install a module for detecting unknown malware. ; ; if you enable AntiVir ProActiv, the ; advanced online scan (Avira ProActiv Community) is also automatically enabled. ; This enhances your system’s protection with the online scanning of ; suspect files. You can disable participation in the ; Avira ProActiv Community in the configuration under Guard->ProActiv ;. More information is available under ; http://www.avira.com/proactiv ; 1 = Install AntiVir ProActiv, 0 = Do not install AntiVir ProActiv. ProActiv=0 ; With this parameter, you can specify whether or not the Avira FireWall is to ; be installed on the system. The Avira FireWall enables rule-based ; control of incoming and outgoing Internet traffic ; 1 = Install Avira FireWall, 0 = Do not install Avira FireWall. FireWall=0 ; This option transfers the set password to the setup routine. The entry is only checked by the setup routine ; if a password was set. ; E.g.: Password=password123 Password=
Code: Select all
AVIRA Setup.inf [DATA] ProgramGroup=1 DesktopIcon=0 ShellExtension=0 Guard=1 MailScanner=1 ShowReadMe=0 RestartWindows=0 ShowRestartMessage=0 ScanMode=0 CopyConfig=0 Upgrade=0 DestinationPath= KeyFile= AVWinIni= SetupMode= ProgramGroup 0 or 1 create/not create startmenu group DesktopIcon 0 or 1 create/not create desktop icon ShellExtension 0 or 1 register or not shlext.dll – avira shell extensions Guard 0 or 1 start or not antivir guard MailScanner 0 or 1 install and start or not MailAcanner. Since most of us use online mail services I set it to 0 ShowReadMe 0 or 1 show or nor readme when install finish RestartWindows 0 or 1 restart windows when install finish ShowRestartMessage 0 or 1 show or not restart message if RestartWindows=1 ScanMode 0 or 1 start scan when install finish CopyConfig – undocumented/reserved – I think is used when Upgrade=1 to copy or not settings for old install – Upgrade – undocumented – I think is used to upgrade an existing install DestinationPath – used to specify path to program files folder (ex: C:Program Files ) – the rest AviraAvira Desktop are added by setup itself – – installer will add from %programfiles% env variables KeyFile full path to keyfile – do not add yourself – installer will add from where extraction before install AVWinIni – optional – full path to file Avwin.ini – use to preconfig avira – be care – seem that current avira versions fails somethimes when is used SetupMode= Update or Modify – used only at second install – not need at first time install – – Update: Updates an existing installation. In this case configuration parameters, for example Guard, are ignored. – Modify: Modifies (reconfigures) an existing installation. In this case no files are copied in the destination path.